Configuring the Device as a DHCP Server(Juniper Router) – Mert Erdil

Merhaba Arkadaşlar,

Juniper Router üzerinde DHCP server kullanmak istiyorsanız aşağıdaki config yardımıyla bu işlemi gerçekleştirebilirsiniz. Tek yapmanız gereken aşağıdaki config altında gerekli alanları değiştirip kullanmak olacak.

set interfaces ge-0/3/0 unit 0 family inet address 10.111.15.1/24
set system services dhcp-local-server group dhcp-pool interface ge-0/3/0.0
set access address-assignment pool dhcp-pool family inet network 10.111.15.0/24
set access address-assignment pool dhcp-pool family inet range pool-range low 10.111.15.2
set access address-assignment pool dhcp-pool family inet range pool-range high 10.111.15.0.254
set access address-assignment pool dhcp-pool family inet dhcp-attributes maximum-lease-time 7200
set access address-assignment pool dhcp-pool family inet dhcp-attributes name-server 192.168.1.5

set interfaces ge-0/3/0 unit 0 family inet address 10.111.15.1/24

set system services dhcp-local-server group dhcp-pool interface ge-0/3/0.0

set access address-assignment pool dhcp-pool family inet network 10.111.15.0/24

set access address-assignment pool dhcp-pool family inet range pool-range low 10.111.15.2

set access address-assignment pool dhcp-pool family inet range pool-range high 10.111.15.0.254

set access address-assignment pool dhcp-pool family inet dhcp-attributes maximum-lease-time 7200

set access address-assignment pool dhcp-pool family inet dhcp-attributes name-server 192.168.1.5

Kolay Gelsin.